AMX Modero ViewPoint MVP-5200i Operation/Reference Manual page 64

Setup Pages
Features on these pages include:
Audio Settings Page
Back:
Connection Status icon:
Master Volume:
Default Panel Sounds:
Internal Sound Level:
Analog
Line In Level:
Intercom
Mic Level:
Intercom Volume:
Audio Output
Audio Output:
50
Saves all changes and returns to the previous page.
The icon in the upper-right corner of each Setup page provides a constant
visual indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
This section allows you to alter the current master volume level:
• Use the Up/Down buttons to adjust the volume level in 25-percent increments
(range = 0 - 100).
• The Master Volume bargraph indicates the current volume level. Press the
bargraph to the left or right of the graph marker to adjust the volume level in
one-percent increments (range = 0 - 100), or press the bargraph and hold to
move the graph marker to the desired level.
• The Mute button toggles the Mute feature.
• Activating the Button Hit button plays a default sound when you touch an
active button.
• Activating the Button Miss button plays a default sound when you touch a
non-active button or any area outside of the active button
• The Play Test Sound button plays a test WAV/MP3 file over the panel's
internal speakers.
Adjusts the volume level on the panel's internal speaker:
• Use the Up/Down buttons to adjust the volume (range = 0 - 100)
• The Internal Sound Level bargraph indicates the current sound level. Press
the bargraph to the left or right of the graph marker to adjust the volume level
in one-percent increments (range = 0 - 100), or press the bargraph and hold
to move the graph marker to the desired level.
• The Mute button mutes the internal speaker volume
Adjusts the volume level of any analog signal coming into the device:
• Use the Up/Down buttons to adjust the input level (range = 0 - 100)
• The Line In Level bargraph indicates the current input level. Press the
bargraph to the left or right of the graph marker to adjust the volume level in
one-percent increments (range 0 - 100), or press the bargraph and hold to
move the graph marker to the desired level.
• The Mute button mutes the line input.
Adjusts the volume level on the intercom's microphone:
• Use the Up/Down buttons to adjust the microphone level (range = 0 - 100).
Press the bargraph to the left or right of the graph marker to adjust the
volume level in one-percent increments (range 0 - 100), or press the
bargraph and hold to move the graph marker to the desired level.
Sets the volume level for intercom calls from another MVP-5200i:
• Use the Up/Down buttons to adjust the Line-In volume level (range = 0 - 100).
• The Line-In Level bargraph indicates the current Line-In level. Press the
bargraph to the left or right of the graph marker to adjust the volume level in
one-percent increments (range 0 - 100), or press the bargraph and hold to
move the graph marker to the desired level.
• The Mute button mutes the Line-In volume.
Enables USB headphone output.
MVP-5200i 5.2" Modero® ViewPoint® Touch Panel with Intercom