AMX Modero ViewPoint MVP-5200i Operation/Reference Manual page 66

Setup Pages
Battery Page (Cont.)
Panel Shutdown:
Battery Charge Status:
Battery Level Port:
Battery Level:
Battery Type:
Battery Power Brightness
Limit:
52
This value determines the number of minutes that would need to pass before
the panel automatically shuts down. Once shut down, the device will have to be
restarted. The Up/Down buttons alter the timeout value (in minutes). A value of
0 disables this feature.
Note: Shutdown mode turns the unit completely off, including communication
circuits, and preserves battery life, unlike Display Timeout/Sleep mode, which
only turns off display.
From Shutdown mode, a unit must be turned on by pressing and holding the
Up-Down-Left-Right button or overlay until the panel begins a bootup, which
may take up to a minute.
Range = 0 - 240, default = 0.
The Battery Charge Status field indicates the power charge currently available
on the battery.
The Battery Level Port field indicates the port being used to report charge
status levels back to the NetLinx Master (set in TPDesign4).
The Battery Level field indicates the level being used to report status levels
back to the NetLinx Master (set in TPDesign4).
The Battery Type field indicates the type of battery currently installed in the
MVP-5200i. The value listed is XPX5000B, 2, or 3.
The DISABLE/DISABLED button acts as a power save feature with two options:
• Disable - Clicking on this button deactivates this power save feature. The
panel will use the Panel Brightness level.
• Disabled - Clicking on this button activates the brightness limit set on the
panel, conserving battery power. Activating this feature causes the panel to
function at 80% of full brightness and overrides the Panel Brightness value
set on the Setup page.
MVP-5200i 5.2" Modero® ViewPoint® Touch Panel with Intercom