Panel Behaves Strangely After Downloading A Panel File Or Firmware - AMX Modero ViewPoint MVP-5200i Operation/Reference Manual

3.
Enter a Device Number value for the panel into the Device Number Keypad. The default is 10001 and the
range is from 1 - 32000.

Panel Behaves Strangely After Downloading A Panel File Or Firmware

Symptom: After downloading a panel file or firmware to a G4 device, the panel behaves strangely.
If the panel already contains a large enough file, subsequent downloads will take up more space than is
available and could often corrupt the Compact Flash. The demo file that typically ships with G4 panels is one
such file.
Symptoms include:



Other problems also started after downloading to a new panel or a panel with a TPD4 file that takes up a
considerable amount of the available Compact Flash.
1.
DO NOT download TPD4 files (of large size) over the demo pages, or any other large TPD4 file.
2.
First download a small blank one page file to the G4 panel using the Normal Transfer option to send/
download the page.
3.
Reboot the device.
4.
Do your regular file or firmware download.
MVP-5200i 5.2" Modero® ViewPoint® Touch Panel with Intercom
Having to repeat the download.
Inability to make further downloads to the panel. May get "directory" errors, "graphics hierarchy"
errors, etc., indicating problems with the Compact Flash.
Panel will not boot, or gets stuck on "AMX" splash screen.
Appendix C: Troubleshooting
171