AMX Modero ViewPoint MVP-5200i Operation/Reference Manual page 92

Protected Setup Pages
Features on this page include:
Password Setup Page
Back:
Connection Status icon:
In Panel Password Change:
User Access:
Enable/Enabled:
Report:
To change a previously established password:
1.
In the Password Settings page, press the button in the In Panel Password Change section for the particular
password to be changed.
Password 5 is protected, and can only be changed by the Administrator.
2.
In the Password keyboard, enter the new alphanumeric password.
3.
Press Done when complete.
Only one of the main passwords may be used to access the Protected Settings page.
An individual user password may not be used to access the Protected Settings page
unless it matches one of the main passwords.
To list a new user within the User Access section:
1.
Press a blank button in the User Access section.
2.
In the Name keyboard, enter the user's name or nickname and press Done when finished.
3.
In the Password keyboard, enter the selected alphanumeric password and press Done when finished.
4.
The new user's name will appear in the left column of User Access section. The password will also appear
in the right column, but its characters will be replaced with asterisks.
No matter how many characters are in an actual password, the Password column in
the User Access section will always show five asterisks.
78
Saves all changes and returns to the previous page.
The icon in the upper-right corner of each Protected Setup page provides a
constant visual indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Accesses the alphanumeric values associated to particular password sets.
• The PASSWORD 1, 2, 3, 4 and 5 (protected) buttons open a keyboard to
enter alphanumeric values associated to the selected password group.
Note: Clearing Password #5 removes the need to enter a password before
accessing the Protected Setup page.
Use these buttons to access and modify the user name/password combinations
required for removing the panel from a docking station. The number of user
access passwords on the panel is limited only by the amount of storage
memory available.
Use the UP/DN buttons to scroll through the list of saved User Access user
names and passwords.
The Enable/Enabled button allows you to toggle between activating or
deactivating the MVP panel requirement of a user to enter a pre-defined
password before removing the panel from a connected docking station:
• Enable - does not prompt the user for a password, the docking station just
releases the panel when the security release pushbutton is pressed.
• Enabled - requires that a valid password from the User Access list be entered
before removing a panel from a docking station.
The Report button enables/disables reporting the panel's docking status to the
Master.
MVP-5200i 5.2" Modero® ViewPoint® Touch Panel with Intercom