Bmi; Bml - AMX Modero ViewPoint MVP-5200i Operation/Reference Manual

"^" Button Commands (Cont.)
^BMF
(Cont.)

^BMI

Set the button
mask image.

^BML

Set the maximum
length of the text
area button.
MVP-5200i 5.2" Modero® ViewPoint® Touch Panel with Intercom
'%GI<bargraph invert>' = Set the bargraph invert/noninvert or joystick coordinate
(0,1,2,3). ^GIV section on page 115 more information.
'%GU<bargraph ramp up>' = Set the bargraph ramp up time in intervals of 1/10 second.
'%GD<bargraph ramp down>' = Set the bargraph ramp down time in 1/10 second.
'%GG<bargraph drag increment> = Set the bargraph drag increment. Refer to the ^GDI
command on page 115 for more information.
'%VI<video ON/OFF>' = Set the Video either ON (value=1) or OFF (value=0).
'%OT<feedback type>' = Set the Feedback (Output) Type to one of the following:
None, Channel,Invert, ON (Always ON), Momentary, or Blink.
'%SM' = Submit a text for text area button.
'%SF<1 or 0>' = Set the focus for text area button.
'%OP<0-255>' = Set the button opacity to either Invisible (value=0) or Opaque
(value=255).
'%OP#<00-FF>' = Set the button opacity to either Invisible (value=00) or Opaque
(value=FF).
'%UN<Unicode text>' = Set the Unicode text. See the ^UNI section on page 119 for the
text format.
'%LN<0-240>' = Set the lines of video being removed. ^BLN section on page 106 for
more information.
'%EF<text effect name>' = Set the text effect.
'%EC<text effect color>' = Set the text effect color.
'%ML<max length>' = Set the maximum length of a text area.
'%MK<input mask>' = Set the input mask of a text area.
'%VL<0-1>' = Log-On/Log-Off the computer control connection
'%VN<network name>' = Set network connection name.
'%VP<password>' = Set the network connection password.
Example:
SEND_COMMAND Panel,"'^BMF-500,1,%B10%CFRed%CB Blue
%CTBlack%Ptest.png'"
Sets the button OFF state as well as the Border, Fill Color, Border Color, Text Color, and
Bitmap.
Mask image is used to crop a borderless button to a non-square shape. This is typically
used with a bitmap.
Syntax:
"'^BMI-<vt addr range>,<button states range>,<mask image>'"
Variable:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
mask image = Graphic file used.
Example:
SEND_COMMAND Panel,"'^BMI-530,1&2,newMac.png'"
Sets the button with variable text 530 ON/OFF state mask image to 'newmac.png'.
If this value is set to zero (0), the text area has no max length. The maximum length avail-
able is 2000. This is only for a Text area input button and not for a Text area input masking
button.
Syntax:
"'^BML-<vt addr range>,<max length>'"
Variable:
variable text address range = 1 - 4000.
max length = 2000 (0=no max length).
Example:
SEND_COMMAND Panel,"'^BML-500,20'"
Sets the maximum length of the text area input button to 20 characters.
Programming
109