AMX Modero ViewPoint MVP-5200i Operation/Reference Manual page 16

Introduction
The MVP-5200i comes with an integrated rear "kickstand", allowing it to be used and displayed away from a
Charging Station if necessary (FIG. 2). It also comes with a pre-installed 802.11g WPA/WPA2 SDIO wireless
card.
Kickstand
FIG. 2
MVP-5200i side view (with kickstand)
MVP-5200i Specifications
Models Available:
Dimensions:
Weight:
Enclosure:
Power Requirements
(Without Charging):
Power Requirements (While
Charging):
Minimum Power Supply
Required:
Power Modes:
Battery Duration:
Certifications:
2
• MVP-5200i-GB (Gloss Black - FG5966-01)
• MVP-5200i-GW (Gloss White - FG5966-02)
4 3/4" x 7 9/16" x 13/16" (120.7 mm x 191.8 mm x 20.3 mm)
• Panel: 1.4 lbs ( )
0.64 kg
MVP-5200i-GB: High-gloss black plastic with brushed metal retaining ring.
MVP-5200i-GW: High-gloss white plastic with brushed metal retaining ring.
Panel with battery fully charged:
• Constant current draw: 0.3 A @ 12 VDC
• Startup current draw: 0.4 A @ 12 VDC
Panel while charging battery:
• Constant current draw: 1.1 A @ 12 VDC
• Startup current draw: 1.3 A @ 12 VDC
• PS3.0 Power Supply (FG423-30) - both 120 VAC and 240 VAC models are
shipped with this power supply
• ON: All necessary modules are powered up and device remains online with
the NetLinx Master.
• SLEEP: Only the backlight will be turned off after the user selectable time of
inactivity has elapsed. Panel resumes the ON mode in ~ 1 second.
• SHUTDOWN: Power to all peripherals and components is turned off. The
system remains in this mode until it is rebooted.
• Eight hours of normal use, in a combination of On, Sleep, and Shutdown.
• Six hours of continuous use (continuous On state).
• FCC Part 15 Class B and CE
• CE
• IEC60950
• RoHS
• Japan Approved
• Lithium-Polymer microbattery: UN/IATA
MVP-5200i 5.2" Modero® ViewPoint® Touch Panel with Intercom
DC power jack
Mini-USB port