AMX Modero ViewPoint MVP-5200i Operation/Reference Manual page 54

Configuring Communication
FIG. 44 Web Control VNC installation and Password entry screens
6.
Click Yes from the Security Alert popup window to agree to the installation of the G4 WebControl
application on your computer. This application contains the necessary Active X and VNC client
applications necessary to properly view and control the panel pages from your computer.
The G4 Web Control application is sent by the panel to the computer that is used for
communication. Once the application is installed, this popup will no longer appear.
This popup will only appear if you are connecting to the target panel using a different
computer.
7.
Some situations might display a Connection Details dialog (FIG. 45) requesting a VNC Server IP
Address. This is the IP Address not of the Master but of the target touch panel. Depending on which
method of communication is being used, it can be found in either:


FIG. 45 Connection Details dialog
8.
If a WebControl password was set up on the G4 WebControl page, a G4 Authentication Session password
dialog box appears on the screen within the secondary browser window.
9.
Enter the Web Control session password into the Session Password field (FIG. 45).
This password was previously entered into the Web Control Password field within the G4 Web Control
page on the panel.
40
Wired Ethernet - System Settings > IP Settings section within the IP Address field.
Wireless - Wireless Settings > IP Settings section within the IP Address field.
If this field does not appear, continue to step 9.
IP Address of touch panel
- obtained from IP Settings section of
the Wireless Settings page (MVP)
MVP-5200i 5.2" Modero® ViewPoint® Touch Panel with Intercom