AMX Modero ViewPoint MVP-5200i Operation/Reference Manual page 46

Configuring Communication
FIG. 32 Completing the Found New Hardware Wizard
When an IP address is assigned to the usb0 interface on the device, Windows XP will make an attempt to
assign an IP address to the corresponding interface on the Windows side. Usually, this IP address is a random
value and in a totally different subnet. The user may set the Windows network properties for the Ethernet over
USB interface to have a specific address whenever the Windows XP system detects an MVP-5200i with an
assigned IP address.
In Windows XP:
1.
From the Windows XP desktop, click on Start > Settings > Network Connections. This opens a window
listing the currently active network connections.
2.
Select the connection that is specific to AMX USB Device Link.
3.
Right click and select Properties.
4.
In the Local Area Connection 3 Properties window (FIG. 33) under the General tab, select Internet
Protocol (TCP/IP) and click on Properties.
FIG. 33 Local Area Connection 3 Properties
32 MVP-5200i 5.2" Modero® ViewPoint® Touch Panel with Intercom