Eap-Peap Settings - AMX Modero ViewPoint MVP-5200i Operation/Reference Manual

Protected Setup Pages
EAP-FAST Settings (Cont.)
Password:
Automatic PAC
Provisioning:
PAC File Location:
Save/Cancel:
Refer to the EAP Authentication section on page 184 and the Using the Site Survey Tool section on page 23 for
further details on these security options.

EAP-PEAP Settings

Press the EAP-PEAP button to open the EAP-PEAP Settings page (FIG. 67).
FIG. 67
Wireless Settings page - EAP-PEAP Settings
68
Opens an on-screen keyboard. Enter the network password string specified
for the user entered within the Identity field (used by the panel to identify itself
to an Authentication (RADIUS) Server)
Note: This information is similar to the password entered to gain access to a
secured workstation.
This selection toggles PAC (Protected Access Credential) Provisioning -
Enabled (automatic) or Disabled (manual).
• If Enabled is selected, the following PAC File Location field is disabled,
because the search for the PAC file is done automatically.
• If Disabled is selected, the user is required to manually locate a file
containing the PAC shared secret credentials for use in authentication. In
this case, the IT department must create a PAC file and then transfer it into
the panel using the AMX Certificate Upload application.
Note: Even when automatic provisioning is enabled, the PAC certificate is
only downloaded the first time that the panel connects to the RADIUS server.
This file is then saved into the panel's file system and is then reused from
then on. It is possible for the user to change a setting, such as a new Identity,
that would invalidate this certificate. In that case, the panel must be forced to
download a new PAC file.
To do this, set Automatic PAC Provisioning to Disabled and then back to
Enabled. This forces the firmware to delete the old file and request a new
one.
This field is used when the previous Automatic PAC Provisioning option has
been Disabled.
• When pressed, the panel displays an on-screen PAC File Location
keyboard which allows you to enter the name of the file containing the PAC
shared secret credentials for use in authentication.
• This field is only valid when the automatic PAC provisioning feature has
been enabled via the previous field.
• Save - store the new security information, apply changes, and return to the
previous page.
• Cancel - discard changes and return to the previous page.
MVP-5200i 5.2" Modero® ViewPoint® Touch Panel with Intercom