Power Management; Proper Battery Maintenance - AMX Modero ViewPoint MVP-5200i Operation/Reference Manual

Battery Life and Replacement
MVP-BP-5X Battery Pack (FG5966-27) Specifications
Dimensions:
Weight:
Certifications:
Operating/Storage
Environment
Included Parts

Power Management

Since the MVP-5200i is a battery-powered handheld device, power management is a necessary concern. Under
active use, the charge on the integral Lithium-Polymer battery can last for as long as five days. However, to
maximize usability and minimize the chances of the device becoming completely discharged at a critical
moment, the MVP-5200i should be kept in its charging cradle or wall station when not in use.
The MVP-5200i operates on three distinct power modes:




Proper Battery Maintenance

To insure maximum performance and reliability of your AMX Wireless Touch Panel, please insure that a full
charge is performed every 3 months if not used regularly. If a battery is left uncharged beyond this time frame,
it may result in premature battery lifespan degradation and will require replacement.
148
4 1/8" x 2 1/2" x 3/8" (10.48 cm x 6.35 cm x 0.95 cm)
0.35 lbs (158.76 g)
• CE (pending)
• IEC/EN-60950
• RoHS
• UN/IATA
• UL (pending)
• Operating Temperature: 0° C (32° F) to 45° C (113° F)
• Operating Humidity: 20% - 85% RH
• Storage Temperature: -20° C (-4° F) to 60° C (140° F) for periods of less
than one month, -20° C (-4° F) to 45° C (113° F) for less than three months
but greater than one month, and -20° C (-4° F) to 20° C (68° F) for less
than one year but greater than three months
• Storage Humidity: 5% - 85% RH
• Replacement MVP-5200i battery ( 57-0016-SA )
• Upper rubber feet (screw covers, black, 60-5966-13BL ; and white, 60-
5966-13GR )
• Replacement label to cover lower screws: black
( 91-5966-01BL ) and white ( 91-5966-01WH )
• Upper screws (5), ( 80-0125-01 )
• Lower screws (3), ( 80-0125-02 )
• Replacement hinge cover (2), ( 66-5966-14 )
• Replacement battery cover screws (2), ( 60-5966-44 )
• Residual voltage discharge adaptor ( SAA5966-27-A )
Awake - This is the normal power mode of the panel during operation. In this mode, all necessary
modules are powered up and their respective clocks are being driven appropriately. The device
remains online with the Netlinx Master and continues to appear in the online tree of Netlinx Studio.
Sleep - This mode of operation can be selected through the Setup Pages and only controls the
backlight. In this case, the unit remains on all the time, and only the backlight will be turned off
after the user-selectable time of inactivity has elapsed. The device remains online with the Netlinx
Master and continues to be shown in the online tree of Netlinx Studio. The unit shall transfer to the
Awake mode after it detects a touch on the touchscreen or navigation wheel. This mode uses 80
percent of the power required for the Awake mode.
Shutdown - The system enters this mode after a user selectable amount of inactivity time has
elapsed or if the battery level falls below10 percent of its full charge. This is the absolute lowest
mode of operation, during which power to all peripherals and components is turned off. It is not
online with the NetLinx Master and will not appear in NetLinx Studio. The system remains in this
mode until it is rebooted. In the latter case, the panel has to be placed in a Table Charging Station in
order for it to be operational.
MVP-5200i 5.2" Modero® ViewPoint® Touch Panel with Intercom