'61HN252' by American Honda Motor Co. - Page 280 of 540
[2005-2008] [TRX500 FA/FGA]
FRONT WHEEL/SUSPENSION/STEERING
FRONT WHEEL
Do not interchange
the left and right
tires.
14-12
1 of 1
Install the throttle housing cover with a new gasket.
Install and tighten the three screws.
Adjust the throttle lever free play
(page 3-5).
If the throttle cable was replaced, perform the initial
setting
(page 24-6)
after adjustment the free play.
REMOVAL
Loosen the wheel nuts.
Place the support block under the frame to raise the
front wheel off the ground.
Remove the nuts and wheel.
INSTALLATION
Install the wheel with the arrow mark facing in the
normal rotating direction.
Install the wheel nuts and tighten them.
TORQUE: 64 N·m (6.5 kgf·m, 47 lbf·ft)
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
GASKET
WHEEL NUTS
WHEEL NUTS
COVER
SCREWS
3/9/2008 11:03 PM