Honda 2005-2008 RX500 FA Service Manual page 157

'61HN252' by American Honda Motor Co. - Page 157 of 540
[2005-2008] [TRX500 FA/FGA]
1 of 1
Remove the upper engine hanger bolts, nut, bracket
and mounting rubbers.
Remove the following:
left lower engine hanger nut and bolt
mounting rubbers
bolts and hanger bracket
right lower engine hanger nut and bolt
spacer and mounting rubbers
Move the engine forward and disconnect the output
shaft from the universal joint.
Remove the engine from the frame toward the left
side.
Remove the engine hanger bushings and dust seals.
Check the mounting rubbers, hanger bushings and
dust seals for wear or damage.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
ENGINE REMOVAL/INSTALLATION
BRACKET
MOUNTING RUBBERS
HANGER BOLT
BRACKET
BOLTS
HANGER NUT
MOUNTING RUBBERS
MOUNTING RUBBERS
HANGER BUSHING
BOLT/NUT
BOLTS
HANGER NUT
MOUNTING RUBBERS
HANGER BOLT
SPACER
DUST SEAL
HANGER BUSHING
7-7
3/9/2008 10:48 PM