Honda 2005-2008 RX500 FA Service Manual page 294

'61HN252' by American Honda Motor Co. - Page 294 of 540
[2005-2008] [TRX500 FA/FGA]
FRONT WHEEL/SUSPENSION/STEERING
Keep the master handlebar assembly from the steering shaft
cylinder reservoir
upright.
14-26
1 of 1
nuts
handlebar front cover
handlebar lower holder nuts and washers
Remove the cotter pins.
Remove the tie-rod ball joint nuts while holding the
joint stud flats with an open end wrench.
Remove the tie-rods from the steering shaft arm.
Remove the cotter pin, steering shaft end nut,
washer and steering shaft arm.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
HANDLEBAR FRONT COVER
NUTS
HANDLEBAR
LOWER HOLDER NUTS/WASHERS
COTTER PINS
TIE-RODS
COTTER PIN
STEERING SHAFT ARM
NUTS
NUT/WASHER
3/9/2008 11:05 PM