'61HN252' by American Honda Motor Co. - Page 423 of 540
[2005-2008] [TRX500 FA/FGA]
IGNITION COIL
IGNITION TIMING
1 of 1
REMOVAL/INSTALLATION
Remove the fuel tank
(page 2-6).
Disconnect the plug cap from the plug.
Release the spark plug wire from the wire clamp.
Disconnect the ignition coil connectors.
Remove the ignition coil.
Installation is in the reverse order of removal.
Remove the recoil starter cover
(page 2-4).
Start the engine and warm it up to operating tem-
perature.
Stop the engine and remove the timing hole cap
from the rear crankcase cover.
Connect the timing light and tachometer.
Start the engine, let it idle (1,400 rpm (min
)) and
-1
check the ignition timing.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
CONNECTORS
IGNITION COIL
TIMING HOLE CAP
TIMING LIGHT
IGNITION SYSTEM
SPARK PLUG CAP
CLAMP
20-7
3/9/2008 11:21 PM