Cylinder/Piston Removal - Honda 2005-2008 RX500 FA Service Manual

'61HN252' by American Honda Motor Co. - Page 191 of 540
[2005-2008] [TRX500 FA/FGA]

CYLINDER/PISTON REMOVAL

Do not strike the
cylinder too hard
and do not damage
the mating surface
with a screwdriver.
1 of 1
CYLINDER REMOVAL
Remove the cylinder head (page 8-8).
Remove the cam chain tensioner lifter sealing bolt.
Turn the tensioner shaft clockwise with the stopper
tool to retract the tensioner, then insert the stopper
fully to hold the tensioner in the fully retracted posi-
tion.
TOOL:
Cam chain tensioner stopper 07NMG-MY90101 or
07ZMG-MCAA400
(U.S.A. only)
Remove the two bolts.
Remove the cam chain tensioner lifter from the cyl-
inder.
Remove the gasket.
Remove the camshaft (page 8-15).
Remove the four bolts and cylinder.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
BOLTS
GASKET
CYLINDER
CYLINDER/PISTON
TENSIONER LIFTER
SEALING BOLT
STOPPER TOOL
TENSIONER LIFTER
BOLTS
9-5
3/9/2008 10:52 PM