Honda 2005-2008 RX500 FA Service Manual page 364

'61HN252' by American Honda Motor Co. - Page 364 of 540
[2005-2008] [TRX500 FA/FGA]
FRONT DRIVING MECHANISM
17-16
1 of 1
Remove the differential case lower mounting bolt.
Move the differential forward for maximum clear-
ance between the propeller shaft joint and engine.
Pull the propeller shaft joint out of the output shaft
of the engine.
Remove the O-ring.
Remove the boot band and propeller shaft boot
from the pinion joint.
Pull the propeller shaft to force the stopper ring past
the groove in the pinion joint and remove the pro-
peller shaft.
Remove the stopper ring from the propeller shaft
end.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
BOLT
PROPELLER SHAFT JOINT
OUTPUT SHAFT
BOOT BAND
PINION JOINT PROPELLER SHAFT BOOT
STOPPER RING
PINION JOINT
O-RING
PROPELLER SHAFT
3/9/2008 11:14 PM