'61HN252' by American Honda Motor Co. - Page 303 of 540
[2005-2008] [TRX500 FA/FGA]
1 of 1
Apply grease to new dust seal lips and install the
dust seals into the lower pivot until they are flush
with the pivot surfaces.
Install the pivot collar.
INSTALLATION
Install the front shock absorber in the frame and
insert the upper and lower mounting bolts from the
front side.
Install and tighten the new mounting nuts.
TORQUE: 44 N·m (4.5 kgf·m, 33 lbf·ft)
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
FRONT WHEEL/SUSPENSION/STEERING
LOWER MOUNTING
NUT/BOLT
DUST SEALS
COLLAR
UPPER MOUNTING
NUT/BOLT
14-35
3/9/2008 11:07 PM