Honda 2005-2008 RX500 FA Service Manual page 478

'61HN252' by American Honda Motor Co. - Page 478 of 540
[2005-2008] [TRX500 FA/FGA]
SELECTABLE 4WD SYSTEM
23-12
1 of 1
Install the front final clutch cover stay onto the
clutch housing, then install and tighten the three
mounting bolts.
Clamp the rear VSS wire with the wire clamp.
Install the front final clutch cover onto the housing
while aligning its hole with the boss on the housing.
Install and tighten the two bolts.
Connect the rear VSS 3P (Yellow) connector.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
REAR VSS
COVER STAY
BOLTS
Align FINAL CLUTCH COVER
BOLTS
3P (YELLOW) CONNECTOR
'05, '06 shown:
CLAMP
3/9/2008 11:26 PM