Cylinder Head Disassembly - Honda 2005-2008 RX500 FA Service Manual

'61HN252' by American Honda Motor Co. - Page 171 of 540
[2005-2008] [TRX500 FA/FGA]
Do not strike the
cylinder head too

CYLINDER HEAD DISASSEMBLY

To prevent loss of
tension, do not
compress the valve
springs more than
remove the cotters.
1 of 1
Remove the spark plug.
Loosen the band screw and remove the carburetor
insulator if necessary.
Remove the engine coolant temperature (ECT) sen-
sor if necessary.
Remove the four bolts and the cylinder head.
hard.
Remove the gasket and dowel pins.
Remove the valve spring cotters using the valve
spring compressor.
TOOL:
necessary to
Valve spring compressor
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
CYLINDER HEAD/VALVE/CAMSHAFT
BAND SCREW
INSULATOR
BOLTS
GASKET
07757-0010000
ECT SENSOR
CYLINDER HEAD
DOWEL PINS
SPRING COMPRESSOR
8-9
3/9/2008 10:50 PM