Honda 2005-2008 RX500 FA Service Manual page 329

'61HN252' by American Honda Motor Co. - Page 329 of 540
[2005-2008] [TRX500 FA/FGA]
1 of 1
Fill the master piston boot with silicone grease.
Install the boot.
Install the brake light switch by aligning the hole of
the master cylinder and boss of the brake light
switch.
Install the bracket onto the brake light switch.
Install the brake light switch by aligning the hole of
the bracket and boss of the brake switch
Apply locking agent to the threads of the screw.
Install and tighten the screw to the specified torque.
TORQUE: 1.2 N·m (0.1 kgf·m, 0.9 lbf·ft)
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
BOOT
Align
Align
BRACKET
SCREW
BRAKE SYSTEM
BRAKE LIGHT SWITCH
BRAKE SWITCH
16-11
3/9/2008 11:10 PM