Oil Cooler - Honda 2005-2008 RX500 FA Service Manual

'61HN252' by American Honda Motor Co. - Page 101 of 540
[2005-2008] [TRX500 FA/FGA]

OIL COOLER

1 of 1
CHECK VALVE INSPECTION
Remove the oil gallery sealing bolt and washer on
the right side of the front crankcase cover.
Remove the valve spring and check valve.
Check the valve for wear, sticking or other damage.
Check the spring for fatigue or damage.
Install the check valve and spring.
Clean the sealing bolt threads and install it with a
new sealing washer.
TORQUE: 34 N·m (3.5 kgf·m, 25 lbf·ft)
INSPECTION
Remove the radiator grille plate (page 3-16).
Check the oil cooler pipe joints and seams for leaks.
Check the oil cooler air passage for clogging or
damage.
Straighten bent fins with a small, flat blade screw-
driver and remove insects, mud or other obstruc-
tions with compressed air or low pressure water.
REMOVAL
Remove the front fender (page 2-11).
Remove the six clips and the radiator grille.
Remove the oil cooler pipe joint bolts and joints
from the oil cooler.
Remove the O-rings.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
SEALING BOLT/
WASHER
LUBRICATION SYSTEM
SPRING
CHECK
VALVE
OIL COOLER
TRIM CLIPS
RADIATOR GRILLE
JOINT BOLTS
4-7
3/9/2008 10:42 PM