Setting Of Connection For Actual Operating Environment - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation
3.3 Connection and Setting of MMB
Administrator > set ip 192.168.0.10 255.255.255.0
Administrator > set gateway 192.168.0.1
- In case of IPv6
Set IP Address by using following commands.
# set hostname <FQDN type host name>
# set ipv6 [auto | <IP Address/Prefix>]
# set gateway_ipv6 <default gateway IP Address>
# set http enable
Example: In case of IP Address=2001:2345:6789::10/ Prefix=64/ gateway=2001:2345:6789::1
Administrator > set ipv6 2001:2345:6789::10/64
Administrator > set gateway_ivp6 2001:2345:6789::1
6. Enable http by set http enable command.
Web-UI of MMB can be accessed from MMB console PC through LAN.
Administrator > set http enable
Remark
Use set https command to enable https.
Administrator > set https enable
7. Enable telnet by using set telnet enable command.
Remark
Only when connecting to the CLI port, this procedure is required.
Administrator > set telnet enable
8. Set date and time as required.
Use the following commands.
Administrator> set date MMDDhhmm[[CC]YY][,ss]
Example: To set 2013/7/27 as date and 13:10:00 as time
Administrator > set date 072713102013,00

3.3.3 Setting of Connection for Actual operating Environment

According to the following operations, set the connection environment for the actual operation.
- Set IP address of MMB console PC
- Connect MMB console PC to the User port of the MMB
- Connect external LAN of PRIMEQUEST 2000 series
Setting of IP address of MMB console PC
Set the IP address of the PC used as the MMB console. See the Manual of the PC to be used for the setting method.
Connection of MMB console PC to the user interface of the MMB
Connect the MMB console PC to the user port #0 of the MMB using LAN cable. Once it is connected, communication
between MMB console PC and MMB is possible via LAN.
14
CA92344-0536-04