Memory Scan; Weather Channel Scan (Available With The Ic-A14 Only) - Icom IC-A14S Instruction Manual

5
SCAN OPERATION
n Memory scan
NOTE: Program 2 or more memory channels with "TAG"
setting to start memory scan.
q Push [MR] to select memory mode.
• For IC-A14, select the desired BANK if desired. (p. 12)
w Push [SQLY]/[SQLZ] to set the squelch level to the
point where noise is just muted.
For IC-A14
e Push [FUNC], then push [SCAN](2) to start the scan.
• When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, push [Y]/[Z].
For IC-A14S
e Push and hold [Y]/[Z] for 1 sec. to start the scan.
• When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, push [Y]/[Z].
r T o stop the scan, push
[CLR].
Decimal point blinks during
scan.
19
n Weather channel scan
(Available with the IC-A14 only)
q Push [FUNC], then push [WX](7) to select a weather
channel mode.
w Set squelch to the point where noise is just muted with
[SQLY]/[SQLZ].
e Push [FUNC], then push [SACN(2) to start the scan.
• When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, push [Y]/[Z].
r To stop the scan, push [CLR].
Decimal point blinks during
scan.
[Z]
[Y]
[MR]
[SCAN](2)
[FUNC]
[Z]
[Y]
[SCAN](2)
[WX](7)
[FUNC]