7
SCANS
Memory scan
Repeatedly scans all entered Memory channels
(except C1 and C2)�
Blank (not entered) Memory channels are skipped�
Ch 00
Ch 01
Blank channels are skipped�
Ch 99
Ch 98
Ch 50
L If two or more Memory channels are not entered, the
Memory scan does not start�
Ch 02
Ch 03
Ch 04
Ch 06
Ch 05
D Memory scan operation
1� Select the Memory mode�
2� Display the SCAN screen�
» SCAN
3� Touch [MEMO] for 1 second�
4� Touch "ALL MEMORY SCAN�"
• The All Memory scan starts�
L When a signal is detected, the scan pauses
according to the "SCAN Resume" setting, and then
resumes�
L To cancel the scan, touch [MEMO]�
5� To close the SCAN screen, push
TIP: Touch GROUP 00 ~ 99 in step 4 to scan
through the Memory channels in the selected group�
(Example: GROUP 00)
L If two or more Memory channels are not entered in the
selected group, the scan does not start�
7-7
Blinks
�