Memory Channel Programming - Icom IC-7410 Instruction Manual

7
MEMORY OPERATION
All Memory channels, including scan edges channels,
can be assigned an alphanumeric names of up to nine
characters each.
Programming a memory name into
Memory channel 99.
q Push [VFO/MEMO] to select the Memory mode.
w Push [Y] or [Z] to select Memory channel 99.
e Push [MENU] one or more times to display the "M2"
screen (Menu 2).
r Push [MEM](F-2) to display the "MEM" screen
(Memory Menu).
t Push [EDT](F-1) to display the "EDT" screen (Mem-
ory Name Edit).
beep sounds.
y Push [F-1] one or more times to select the desired
character type.
u Rotate [DIAL] to select the first character to input.
appropriate keypad key.
nine characters. If you want to reprogram the name,
push [Ω](F-2) or [≈](F-3)
acter, then push [DEL](F-4) to delete it.
i Push [Ω](F-2) to move the cursor backward, or push
[≈](F-3) to move the cursor forward.
o Repeat steps y to i to program a memory name
of up to 9 characters.
!0 Push [MENU] to save the name, and return to the
"MEM" screen.
!1 Push [MENU] again to return to the "M2" screen.
type
ABC A to Z
abc a to z
etc
¦ _ ¯ @
73
to
select any undesired char-
" ' ` ^ + – ⁄ . , : ; = < > ( ) [ ] { }
[EDT] [MEM] [ ]
[MENU]
M2
SCAN MEM SWR TCON
14.19500
MEM
E D T (
EDT
A B C D E L
[ ] [ ]
[F-1] [DEL] [SPC]
Programming "DX spot" into Memory
channel 99.
Character type Cursor
EDT D X s p o t
a b c
Move cursor forwards
Move cursor backwards
Select character type
[ ] [VFO/MEMO]
VSC
USB
) S E L
S P C
Keypad
[DIAL]
D E L S P C
Input a space
Delete a character