Icom IC-7410 Instruction Manual page 48

4
RECEIVE AND TRANSMIT
Electronic keyer functions (continued)
D
This mode is used to set the contest number and count
up trigger, etc.
q In the CW mode, push [MENU] to display the "M1"
screen (Menu 1).
w Push [KEY](F-4) to display the "KEY" screen (Mem-
ory Keyer).
e Push [001](F-4) to enter the Contest Number Set
mode.
r Push [Y](F-1) or [Z](F-2) to select the desired
item.
t Rotate [DIAL] to select the desired option.
ting, if desired.
y Push [MENU] to save, and return to the "KEY"
screen.
u Push [MENU] again to return to the "M1" screen.
1.
This item sets the numbering system used for contest
numbers— normal or short morse numbers.
Short morse numbers are also referred to as "cut"
numbers.
ANO : Sets 1 as A, 9 as N and 0 as O.
ANT : Sets 1 as A, 9 as N and 0 as T.
NO : Sets 9 as N and 0 as O.
NT : Sets 9 as N and 0 as T.
2.
Set the count-up trigger to one of four memory slots
for the contest number exchange. The count-up trigger
allows the contest number to automatically advance
after each complete serial number exchange is sent.
3.
This item shows the current number for the count-up
trigger channel set above.
[F-3](CLR) for 1 second to reset the current number
to 001.
41
Number Style
001
1
-
Select the item
N o r m a l
Reset to the default
setting