Receive And Transmit - Icom IC-7410 Instruction Manual

4

RECEIVE AND TRANSMIT

q Select the desired band. (p. 25)
w Push [SSB] to select the LSB or USB mode.
When operating above 10 MHz, USB is selected first;
when operating below 10 MHz, LSB is selected first.
[SSB] for 1 second to select the data mode.
e Rotate [DIAL] to tune a desired signal.
gram mode. (p. 27)
r Rotate the [AF] control to adjust the audio to a com-
fortable listening level.
t Push [PTT] on the microphone to transmit (or
[TRANSMIT] on the transceiver).
y Speak into the microphone at your normal voice
level.
at this step, if necessary.
u Release [PTT] to receive (or push [TRANSMIT]
again).
35
[TRANSMIT] TX indicator
-
[MIC] [AF] [SSB] [DIAL]
"LSB" or "USB" appears