Memory Operation - Icom IC-7410 Instruction Manual

7

MEMORY OPERATION

The transceiver has 101 Memory channels (99 regular,
and 2 scan edges). The Memory mode is very useful
to quickly change to often-used frequencies.
1–99
P1, P2
D
The following information can be programmed into
Memory channels:
OFF (p. 50)
quency (p. 50)
D
q Push [VFO/MEMO] to select the VFO mode.
w Push [Y] or [Z] to select a Memory channel num-
ber.
selected.
" appears when no information has been pro-
grammed into the Memory channel. (Blank channel)
e Push [VFO/MEMO] to select the Memory mode.
D
q Push [VFO/MEMO] to select the Memory mode.
w Push [Y] or [Z] to select a Memory channel.
selected.
" appears when no information has been pro-
grammed into the Memory channel. (Blank channel)
phone [UP]/[DN] keys. In such case, the blank channels
are skipped.
69
Regular Memory channels with Split frequency capability.
Program Scan Edge Memory channels with only Simplex capability.
Stores the scan edge frequencies for the programmed scan.
-
-
While in the memory mode, all 101 Memory channels
are tunable, which means the programmed frequency
can be tuned temporarily with [DIAL].
Memory data can be erased by static electricity, elec-
tric transients, etc. In addition, they can be erased by
malfunction and during repairs. Therefore, we recom-
mend that memory data be backed up.
[ ]
Appears if the selected Memory
channel has no information.
While in the VFO mode
While in the Memory mode
[ ] [VFO/MEMO]