Interfaces; View On The Connector Panel; Interfaces At The Vdp; General Information - Bosch Rexroth IndraControl VDP 08.3 Manual

DOK-SUPPL*-VDP*08.3***-PR02-EN-P
Rexroth IndraControl VDP 08.3/40.3 Operator Terminal
7

Interfaces

7.1

View on the Connector Panel

7.2

Interfaces at the VDP

7.2.1

General Information

7.2.2

Overview

Fig.7-1: Connector panel of the VDP 40.3, inner side
NOTICE
Use only shielded cables and metallic or conductive connector/coupling covers
with large-area shield support.
NOTICE
Please ensure that the functional earth ground is connected, because other‐
wise the electronics can be destroyed by a potential difference between the
VDP 08.3/40.3 and the PC if the voltage supply is interrupted to only one device
and established again.
Designa‐ Connection type
tion at the
housing
X1S1 DC 24 V power supply
XUSB1/2 2 USB interfaces
XUSB1/4 2 USB interfaces
XSER CDI interface, data
Bosch Rexroth AG
Malfunctions due to insufficient shielding!
Material damages to electronics due to missing
functional earth ground connection!
Connector type (in‐
tegrated)
Phönix connector
strip,
3-pin, MC1,5/3-
G-3,5THT
USB female con‐
nector, 4-pin, type A
USB female con‐
nector, 4-pin, type A
RJ45 female con‐
nector
45/81
Interfaces
Mating connector or
cable (from outside)
Phönix female con‐
nector strip,
3-pin, FK-MCP
1,5/3-ST-3,5
USB connector, 4-
pin, type A
USB connector, 4-
pin, type A
RJ45 connector