Additional Information; Mailbox Security Code; Voicemail Storage Capacity - NEC SL2100 Quick Install Manual

Additional Information

9 – Additional Information

Mailbox Security Code

Each mailbox can have a 4 digit security code setup by the user.
The security cannot be setup or viewed by PCPro or WebPro.
To setup or change your security code options
The user accesses their mailbox.

Press Soft Key Setup or dial 67

Press Soft Key Code or dial 7

Enter the 4 digit security code

Press Soft Key Req or dial 7 if you require to enter the code for internal or remote logon

Press Soft Key NoReq or dial 6 if you only require to enter the code for remote logon

Exit your mailbox
To delete a security code for another mailbox
This can only be done by the Administrator mailbox, refer to the instructions within this guide.
If the Administrator mailbox security code is forgotten?
If the Administrator mailbox has been set to Required for internal or remote logon then they must always enter
the security code to access their mailbox.
If the security code is forgotten then it can only be deleted by another Administrator user.
If there are no other Administrator mailboxes then it is only possible to access the mailbox by additional PCPro
or WebPro changes: change the Security Code option to Remote logon only in Easy Edit-Voicemail-InMail-
InMail Mailboxes-InMail Mailbox Options (CMD47-02-25).
Then access the mailbox internally, you will not need to enter the security code.

Voicemail Storage Capacity


The CPU-C1 card does not have InMail built in, has 2 hours of storage capacity built in for VRS only.

The CPU-C1-A card has 2 hours of storage capacity built in for VRS and InMail.

The SDVMS/SDVML cards have 15hour/120hour storage capacity.

Storage is shared for InMail and VRS recordings.
When the storage capacity is full it will not be possible to record new greetings or messages for VRS or InMail.
There is no warning when the storage capacity is about to become full, the user will not be prompted that there is
no storage capacity until after they attempt to record a greeting or message.
To prevent the storage becoming full:

Set the quantity of InMail messages per mailbox in Easy Edit-Voicemail-InMail-InMail Mailboxes-InMail
Mailbox Options. Default = 20, can be set between 0~99.

If voicemail to e-mail is available consider automatically deleting the message once the mail has been
sent. Easy Edit- Voicemail-InMail-InMail Mailboxes-InMail Mailbox Options. Default = No change (leave
as a new message).
PCPro Cards view or Chassis view will show if the SDVMS/SDVML card is installed.
Quick Install Guide – SL2100 InMail Voicemail rev 1.2
25