It is possible to calculate the approximate loading capacity from the difference
between the permissible total weight and the operating weight
The payload consists of the following components:
›
Passengers
›
All items of luggage and other loads
›
Roof load including roof rack system
›
Equipment not included in the operating weight
›
Trailer drawbar load when towing a trailer (max. 80 kg).
Measuring fuel consumption according to ECE standards and EU guidelines
The measurement of the intra-urban cycle begins with a cold start of the engine.
Afterwards urban driving is simulated.
In the extra-urban driving cycle, the vehicle is accelerated and decelerated in all
gears, corresponding to daily routine driving conditions. The driving speed varies
between 0 and 120 km/h.
The calculation of the combined fuel consumption considers a weighting of about
37 % for the intra-urban cycle and 63 % for the extra-urban cycle.
WARNING
Do not exceed the specified maximum permissible weights – risk of accident
and damage!
Note
If required, you can find out the precise weight of your vehicle at a specialist ga-
■
rage.
Depending on the range of equipment, style of driving, traffic situation, weather
■
influences and vehicle condition, consumption values may deviate from the indi-
cated values.
Specifications - 1.8 litre/112 kW TSI engine
First read and observe the introductory information given on page 232.
Dynamic balancing
A wheel with a residual unbalance greater than 8 g is considered to be an unbal-
anced wheel.
Dimensions
»
.
First read and observe the introductory information given on page 232.
Dimensions (mm)
Length
Width
Width including exterior mirror
Height
Clearance
Wheel base
Track gauge front/rear
a)
GreenLine
Emissions standard
Turning circle diameter - curb-to-curb turning circle/wall-to-
wall turning circle (in metres)
Gradients (in%)
4223
1793
1975
1691/1671
a)
180/155
a)
2578
1541/1537
EU5
10.0/10.32
60
233
Technical data