Foglights and daytime running lights
Fig. 183 Removing: Bulb for fog lights/daytime running lights
First read and observe the introductory information and safety warn-
ings
on page 228.
Changing light bulbs for fog lights
›
Remove the rubber cover
» Fig. 180
A
›
Disconnect plug
» Fig.
183.
1
›
Take the faulty bulb out of the fixture
wards and insert a new one.
›
Insert the rubber cover.
Changing the bulb for the daytime running light
›
Remove the rubber cover
» Fig. 180
A
›
Disconnect plug
» Fig.
183.
3
›
Remove the faulty lamp from the fixture
row. Insert a new lamp using the reverse procedure.
›
Insert the rubber cover.
230
Do-it-yourself
on page 229.
by pressing the light socket down-
2
on page 229.
by turning it in the direction of ar-
4
Replacing the bulb for the licence plate light
First read and observe the introductory information and safety warn-
ings
on page 228.
›
Insert a flat screwdriver into the opening in the area of the arrow
carefully press towards the centre of the lamp, by doing so the lamp jumps out
slightly.
›
Remove the lamp.
›
Remove the faulty bulb from the holder and insert a new one.
›
Replace the glass cover and push in until the stop. Make sure that you install
the glass cover in the correct position.
Fig. 184
Boot lid: Licence plate light
» Fig. 184
and