Skoda Yeti Owner's Manual page 59

Note
If the exterior mirrors were folded in using the rotary knob, they can only be fol-
■
ded back into the driving position using the rotary knob.
If the exterior mirrors were folded in using the remote control key and if the ro-
■
tary knob was in the fold-in position before the ignition was switched on, the mir-
rors will remain in the fold-in position the next time the ignition is switched on.
The mirrors are folded back into the driving position after the rotary knob is
turned from the position  to a different one.
Do not touch the surface of the exterior mirrors if the exterior mirror heater is
■
switched on.
If the power setting function fails at any time, the exterior mirrors can be set by
■
hand by pressing on the edge of the mirror surface.
Contact a specialist garage if there is a fault with the power setting function for
■
the exterior mirrors.
Automatically dimmed exterior mirror on the driver's side

First read and observe the introductory information given on page 54.
The exterior mirror on the driver's side is dimmed together with the interior mir-
ror. If the automatic dimming is switched on, the mirror dims automatically de-
pending on the light striking the mirror from the rear.
When the interior lights are switched on or the reverse gear is engaged, the mir-
ror always moves back into the basic position (not dimmed).
Note
Automatic mirror dimming operates only properly if the light striking the rear of
■
the interior rear-view mirror is not affected by other objects.
Do not affix any stickers in front of the light sensor, so that they do not impair
■
the automatic dimming function or put it out of operation.
If the automatic interior mirror dimming is switched off, the exterior mirror dim-
■
ming is also switched off.


57
Lights and visibility