Skoda Yeti Owner's Manual page 107

›
Select the Phone - New user menu in the information display and wait until the
control unit has completed the search.
›
Select the phone you wish to connect from the list of units found.
›
Confirm the PIN .
1)
›
If your SIM card is blocked by a PIN code, enter the PIN code for the SIM card in
your phone. The telephone connects to the hands-free system (during the first
connection you can only enter the PIN code in the information display when the
vehicle is stationary, as this is the only situation when you can choose whether
the PIN code should be stored).
›
Follow the instructions in the information display, the first time a new user is
stored.
›
Reconfirm the rSAP command on your mobile phone to download the tele-
phone book and the identification data from the SIM card into the control unit.
Connecting the telephone with the hands-free system via the HPP profile
›
®
Activate Bluetooth and the visibility of your mobile phone on your telephone.
›
Switch on the ignition.
›
Select the Phone - New user menu in the information display and wait until the
control unit has completed the search.
›
Select the phone you wish to connect from the list of units found.
›
Confirm the PIN .
1)
›
Follow the instructions on the information display and the mobile phone, to
store a new user or to download the telephone book and identification data
from the SIM card into the control unit.
The telephone primarily connects via the rSAP profile.
If the PIN code was stored, the telephone is automatically detected and connec-
ted with the hands-free system the next time the ignition is switched on. Check
your mobile phone to see whether this automatic connection has been establish-
ed.
Disconnecting the connection
›
By removing the key from the ignition lock (the connection is disconnected dur-
ing a telephone call).
›
By disconnecting the hands-free system in the mobile phone.
›
By disconnecting the user in the Bluetooth - UserSelect user - Disconnect
menu item.
®
1) Depending on the Bluetooth version on the mobile phone, an automatically generated 6-digit PIN
(SSP) will either be displayed, or a 16-digit code displayed in the information display will need to be
entered into your mobile phone and confirmed by following the instructions on your mobile phone
display.
2)
Does not apply for Radio Swing.
On vehicles which are fitted with a radio or navigation system at the factory, it is
possible to terminate the telephone call after removing the key from the ignition
lock by pressing the button on the touchscreen of the radio
tem; refer to the operating instructions for the radio or navigation system.
Note
In the memory of the control unit, up to three users can be stored, whereby the
■
hands-free system can only communicate actively with one user. If a connection
is established with a fourth mobile phone, one of the users must be deleted.
When connecting to the hands-free system, follow the instructions on your mo-
■
bile phone.
Operate the telephone via the information display

First read and observe the introductory information given on page 104.
If no phone is connected to the hands-free system, the message No paired phone
foundappears with the following menu items when the Mobile phone menu is se-
lected.
Help - This menu item appears when no paired phone is stored in the memory
■
of the control unit.
■ Connect - This menu item appears when one or more paired phones are stored
in the memory of the control unit.
New user - New user
■
■ Media player - Media player
Active device - Connected device
■
Paired devices - List of paired devices
■
■ Search - Device search
Visibility - Visibility on/off
■
SOS - Emergency
■
If a telephone is coupled with the hands-free system, the following menu items
can be selected in the Mobile phone menu.
or navigation sys-
2)
Communication and multimedia


105