External Mirror - Skoda Yeti Owner's Manual

WARNING
Concentrate fully at all times on your driving! As the driver you are fully re-
sponsible for the operation of your vehicle. Use the additional interior mirror
only to such an extent that you are in full control of your vehicle at any time.

External mirror


First read and observe the introductory information given on page 54.
Adjust the rear mirror before commencing to drive so that there is a clear view to
the rear.
Heating of the external mirror
›
Place the rotary knob into the position 
The exterior mirror heater only operates when the engine is running and up to an
outside temperature of +20 °C.
Adjusting left and right exterior mirrors simultaneously
›
Place the rotary knob into the position 
surface is identical to the movement of the rotary knob.
It is possible to adjust both mirrors simultaneously or each individual mirror in the
information display » table on page 16 in the Mirror adjust. menu item.
Adjusting the right-hand exterior mirror
›
Place the rotary knob into the position 
surface is identical to the movement of the rotary knob.
Switching off operating control
›
Place the rotary knob into the position 
56
Using the system
Fig. 42
Inner part of door: Rotary knob
» Fig. 42.
» Fig. 42. The movement of the mirror
» Fig. 42. The movement of the mirror
» Fig. 42.
Folding-in both of the exterior mirrors with the rotary knob
›
Place the rotary knob into the position .
The mirrors are folded back into the driving position after the rotary knob is
turned from the position  to a different one.

It is only possible to fold in both exterior mirrors when the ignition is switched on
and at a speed of up to 15 km/h.
Folding-in both of the exterior mirrors using the remote control key
›
If all of the windows are closed, press and hold the lock button
page 32 on the radio remote control for approx. 2 seconds.
The exterior mirrors are folded back into the driving position after opening the
door or switching on the ignition.
Tilting surface of front passenger exterior mirror
On vehicles fitted with the memory function for the driver's seat, the surface of
the mirror tilts down slightly when the reverse gear is engaged and the rotary
knob is in the  » Fig. 42 position. This provides an aid in seeing the kerb of the
pavement when parking the car.
The mirror returns into its initial position, after the rotary knob is moved out of
the position  and put into another position or if the speed is more than 15 km/h.
Memory function for exterior mirrors
On vehicles fitted with a memory function for the driver seat, the relevant setting
for the exterior mirrors is also stored automatically when the seat position is stor-
ed » page 60.
WARNING
Convex (curved outward) or a spherical exterior mirrors increase the vision
■
field. They do, however, make objects appear smaller in the mirror. These mir-
rors are therefore only of limited use for estimating distances to the following
vehicles.
Whenever possible use the interior mirror for estimating the distances to
■
the following vehicles.
CAUTION
Never mechanically fold in or fold back the exterior mirrors with the fold-in func-
tion  by hand as this will damage the electric drive.
» Fig. 15 on
3
