Boot Cover; Net Partition - Skoda Yeti Owner's Manual

WARNING
Do not exceed the maximum permissible load of the fixing nets. Heavy objects
are not secured sufficiently – risk of injury!
CAUTION
The maximum permissible load of the fixing nets is 1.5 kg.
■
Do not place any sharp objects in the nets – risk of net damage.
■

Boot cover


First read and observe the introductory information and safety warn-
ings on page 66.
The boot cover can be removed if you wish to transport bulky goods.
›
Folding the seat backrests forward to make it easier to remove the boot cov-
er » page 64, Adjusting the seat backrest tilt.
›
Unhook the support straps » Fig.
1
›
Place the cover in the horizontal position.
›
Pull the boot cover out of the holders
the boot cover at the front.
›
Fold the slackened front part of the boot cover over the head restraints of the
rear seats.
›
Slightly tilt the boot cover and remove it to the rear.
›
To reinstall, first of all push the boot cover into the holders
the support straps on the boot lid.
1
The removed boot cover can be stowed behind the seat backrests.
Fig. 60
Removing the boot cover
60.
to the rear or press on the bottom of
2
and then hook
2
WARNING
No objects should be placed on the boot cover, the vehicle occupants could be
endangered if there is sudden braking or the vehicle collides with something.
CAUTION
Please ensure that the heating elements for the rear window heater are not dam-
aged as a result of objects placed in this area.

Note
Opening the boot lid also lifts up the boot cover.

Net partition

Fig. 61 Using the net partition behind the front/rear seats

First read and observe the introductory information and safety warn-
ings on page 66.
The net partition can either be installed behind the rear seats or behind the front
seats.
Installing the net partition behind the rear seats
›
Remove the boot cover » page
›
Remove the net partition from the bag.
›
Unfold both parts of the cross rod until they are heard to engage.
›
First of all insert the cross rod into the mount
it forward. In the same way, insert the cross rod into the mount
side of the vehicle.
69, Boot cover.
» Fig. 61 on one side and push
B
B
Seats and stowing

on the other

69