Heating And Air-Conditioning; Air Outlet Vents - Skoda Yeti Owner's Manual

Air outlet vents

Fig. 88 Air vents at the front
Fig. 89 Air vents at the rear

First read and observe the introductory information and safety warn-
ings on page 84.
Open the air outlet vents 3 and 4
›
Turn the horizontal wheel (to the right)
Open the air outlet vents 6
›
Turn the vertical wheel (between the settings)
» Fig. 88.
» Fig. 89.
Close air outlet vents 3 and 4
›
Turn the horizontal wheel into the end position (to the left).
Close air outlet vents 6
›
Turn the vertical wheel into the end position.
Change air flow of air outlet vents 3 and 4
›
In order to change the strength of the air flow, swivel the horizontal lamellas
with the aid of the moveable adjuster.
›
In order to change the lateral direction of the air flow, swivel the vertical lamel-
las with the aid of the moveable adjuster.
Change air flow of air outlet vents 6
›
In order to change the height of the air flow, swivel the horizontal lamellas with
the aid of the vertical wheel upwards or downwards.
›
In order to change the lateral direction of the air flow, swivel the vertical lamel-
las with the aid of the horizontal wheel.
The air outlet vents 3, 4 » Fig. 88 and 6
vidually.
The air outlet vents 6 are only fitted on vehicles with the higher centre console.
Warmed, unwarmed or cooled air will flow out of the air outlet vents according to
the setting of the regulator of the heating or the air conditioning system and the
atmospheric conditions.
Using the air conditioning system economically

First read and observe the introductory information and safety warn-
ings on page 84.
The compressor on the air conditioning system uses power from the engine when
in cooling mode which will effect the fuel consumption.
It recommended to open the windows or the doors of a vehicle for which the inte-
rior has been strongly heated through the effect of direct sunlight in order to al-
low the heated air to escape.
The cooling system should not be switched on while travelling when the window
is open.
If the desired interior temperature can also be achieved without activating the
cooling system, fresh air mode should be selected.
» Fig. 89 can be closed and opened indi-

Heating and air-conditioning



85