Technical Data; Safety Instructions; Safety Precautions When Working On Vehicles With Start-Stop System; Safety Precautions During Road Tests In Which Testing And Measuring Equipment Is Used - Skoda Kodiaq 2017 Workshop Manual

00 –

Technical data

1

Safety instructions

(SRL001300; Edition 11.2018)
⇒ "1.1 Safety precautions when working on vehicles with start-
stop system", page 1
⇒ "1.2 Safety precautions during road tests in which testing and
measuring equipment is used", page 1
1.1 Safety precautions when working on ve‐
hicles with start-stop system
When working on vehicles with start/stop system, please observe
the following instructions:
CAUTION
Risk of injury as a result of automatic engine start in vehicles
with start/stop system.
♦ In vehicles with the start/stop system activated (identifiable
by an indication in the dash panel insert) the engine can start
automatically if required.
♦ Make sure that the start-stop system is deactivated when
carrying out work on the vehicle (switch ignition off, if nec‐
essary switch ignition on again).
1.2 Safety precautions during road tests in
which testing and measuring equipment
is used
Note the following if testers and measuring instruments have to
be used during a road test:
WARNING
There is a risk of accident from deflection and insufficient se‐
curing of testers and measuring instruments.
♦ Using testers and measuring instruments during driving cau‐
ses distraction.
♦ There is an increased risk of injury from unsecured testers
and measuring instruments.
♦ Always attach the testing and measurement equipment to
the rear seat.
♦ Always have the testing and measurement equipment op‐
erated by a 2nd person.
♦ Always operate the testing and measurement equipment
from the rear seat.
♦ Do not operate the testing and measurement equipment
from the front passenger seat.
♦ Persons can be injured by the release of the passenger air‐
bag in the event of an accident.
Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
1. Safety instructions
1