Wlan - Skoda Yeti Owner's Manual

WLAN


Introduction
This chapter contains information on the following subjects:
Switching Wi-Fi network on/off
Connecting an external device to the Wi-Fi network
Operating a Wi-Fi network in the information display
WLAN (also Wi-Fi) is a wireless network for connecting to the Internet.
Using a mobile phone connected with the universal telephone preparation GSM III
via the rSAP profile, it is possible to establish a Wi-Fi network in the vehicle and
to enable passengers with compatible devices to connect to this network.
Switching Wi-Fi network on/off

First read and observe the introductory information given on page 108.
Switching on
›
Connect the mobile phone with the universal telephone preparation GSM III via
the rSAP profile » page 104.
›
Select the Wi-Fi menu item in theMobile phone menu.
The display shows the message Switch on Wi-Fi?
›
Select the Yes menu item.
If no access point is assigned automatically, then this must be entered manually
1)
as per the instructions from the mobile network operator, e.g. "Internet".
If the Wi-Fi network is switched on, the display will show the following message,
for example: WLAN SK_WLAN 1234 switched on.
The display then shows a password for the Wi-Fi network connection. The pass-
word can subsequently be found in the Mobile phone - Wi-Fi - Password - Show
menu.
1)
The name of the access point is defined by the mobile operator.
108
Using the system
If no data connection via Wi-Fi is available, the display will show the message Da-
ta connection not available. This can be caused by a weak GSM signal, for exam-
ple. Try to establish the connection again at a location with stronger signal recep-
tion.
Switching off
›
Select the Wi-Fi Offmenu item in theMobile phone menu.
108
The display shows the message Switch off Wi-Fi?
108
›
Select the OK menu item.
109
The display shows the message Wi-Fi switch off.
Connecting an external device to the Wi-Fi network


First read and observe the introductory information given on page 108.
Connecting using the Wi-Fi network search
›
Switch on the Wi-Fi network
›
On the device to be connected, search for available WLAN networks (Wi-Fi) - see
operating instructions for the device to be connected.
›
Select the appropriate Wi-Fi network connection in the menu of the networks
found (e.g. WLAN SK_WLAN 1234).
If menu item WPA2 is set in the Mobile phone - Wi-Fi - Settings - Encryption
menu, then the password displayed when the Wi-Fi is switched on must be en-
tered in the device to be connected. The password can be found in the Mobile
phone - Wi-Fi - Password - Show menu.
If menu item Open is set in the Mobile phone - Wi-Fi - Settings - Encryption
menu, the connection is made automatically.
Connecting using WPS (service for easy connection)
›
Switch on the Wi-Fi network
›
Open the Mobile phone - Wi-Fi - WPS config. menu in the instrument cluster.
›
In the device to be connected, select the connection using WPS function - see
operating instructions for the device to be connected.
If the Pushbutton menu item is selected in the instrument cluster, the Wi-Fi con-
nection is made automatically.
» page 108, Switching Wi-Fi network on/off.
» page 108, Switching Wi-Fi network on/off.

