Air Conditioning System (Manual Air Conditioning System) - Skoda Yeti Owner's Manual

Hide thumbs Also See for Yeti:
Table of Contents

Advertisement

Switching off
Press the
» Fig. 90
on page 86 button again.
The warning light in the button goes out.
Recirculated air mode is switched off automatically if the air distribution control
C
is turned to position 
» Fig. 90
switched on again from this setting by repeatedly pressing the
WARNING
Do not leave recirculated air mode on over a longer period of time, as "stale"
air can cause fatigue of the driver and passengers, reduce attention levels and
also cause the windows to mist up. The risk of having an accident increases.
Switch off recirculated air mode as soon as the windows start to mist up.
Air conditioning system (manual air conditioning
system)
Introduction
This chapter contains information on the following subjects:
Operation
Setting the air conditioning system
Recirculated air mode
The cooling system only operates if the following conditions are met:
Switched on.
The engine is running.
The outside temperature is above approx. +2 °C.
The blower switch is switched on (positions 1-4).
Under certain circumstances, air at a temperature of about 5 °C can flow out of
the vents when the cooling system is switched on.
Lengthy and uneven distribution of the air flow out of the vents and large differ-
ences in temperature, such as when getting out of the vehicle, may cause colds in
sensitive persons.
88
Using the system
on page 86. Recirculated air mode can be
button.
Note
We recommend that you have the air conditioning system cleaned by a specialist
garage once every year.
Operation
Fig. 91 The air conditioning system: Control elements
88
First read and observe the introductory information given on page 88.
90
90
Setting temperature
Turn the control dial
» Fig. 91
A
Turn the control dial
to the left to decrease the temperature.
A
Controlling blower
Turn the blower switch
B
the blower on.
Turn the blower switch
B
Press button
to shut off the fresh air supply
4
Regulating the air distribution
The direction of the inlet air flow is controlled with air distribution regulator
» Fig. 91 » page
85, Air outlet vents.
C
Switching the cooling system on and off
Press the button
» Fig.
1
to the right to increase the temperature.
» Fig. 91
into one of the positions, 1 to 4, to switch
into position 0 to switch the blower off.
» Fig.
91.
91. The warning light lights up in the button.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents