Skoda Yeti Owner's Manual page 153

Note
On the bottom of the key is a code number. If you lose a key, please contact a
specialist garage, who will be able to use this code number to provide you with a
new one.
Adjusting the ready position
Fig. 126 Setting the ready position
Fig. 127 Ready position

First read and observe the introductory information and safety warn-
ings on page 150.
Always set the ready position before fitting the tow bar.
›
Turn the key in direction of the arrow 1 to the stop
A
›
Hold the tow bar with your left hand.
›
Using your right hand, pull the handwheel
drag in the direction of the arrow 3 to the stop.
The handwheel remains locked in this position.
Ready position





The tow bar is now ready to be inserted into the mounting recess.
If the tow bar cannot be correctly placed in the ready position, then it must
not be used.
When in the ready position, the key cannot be removed from the handwheel lock.
» Fig. 126.
» Fig. 127
The key is in the unlocked position and cannot be removed.
C
The locking balls can be pushed fully into the tow bar.
D
The red marking on the handwheel is located in the green box on the tow
E
bar.
There is a clear gap of approx. 5 mm
bar.
WARNING
CAUTION
in the direction of the arrow 2 and
B
between the handwheel and the tow
F
Towing a trailer

151