List - Arrange the entries in the phone book
■
Surname - Arrange according to surname
■
First name - Arrange according to first name
■
Own number - optionally display your own telephone number on the display of
■
the device of the person you are calling (this function is network-dependent)
■
Network depnd. - Network-dependent own number display
Yes Allow display of your own number
■
No Prohibit display of your own number
■
■
Signal settings - Signal settings
Ring tone - Ring tone setting
■
Volume - Signal volume settings
■
■
Turn vol. up - Increase volume
Turn vol. down - Decrease volume
■
Phone settings - Phone settings
■
■
Select operator - Select operator
Automatic - Automatic operator selection
■
Manual - Manual operator selection
■
■
Network mode - Network mode
UMTS - UMTS
■
GSM - GSM
■
■
Automatic - Automatic
SIM mode - Applies to telephones with the rSAP profile that simultaneously
■
support the operation of two SIM cards - there is an option to choose which
SIM card to connect to the hands-free system
SIM mode 1 - SIM 1 is connected to the hands-free system
■
SIM mode 2 - SIM 2 is connected to the hands-free system
■
Phone mode - Toggle between rSAP and HFP mode
■
Premium - rSAP mode
■
Handsfree - HFP mode
■
Off time - Set the off time in increments of 5 min
■
■
Access point - Set the Internet access point
APN - Change the access point name
■
User name - User Name
■
■
Password - Password
Switch off ph. - switch off the phone unit (the mobile phone remains paired)
■
Back
Return in the main menu of the information display.
Internet connection via Bluetooth
First read and observe the introductory information given on page 104.
A notebook can, for example, be connected to the Internet via the hands-free
system.
The control unit of the hands-free system supports the GPRS, EDGE and UMTS/3G
technologies.
An Internet can only be established via a telephone which is connected via the
rSAP profile.
The procedure for connecting to the Internet can vary depending on the type and
version of the operating system as well as the type of the device to be connected.
Successfully connecting to the internet requires appropriate knowledge of the
operating system for connecting the device .
Process of connection
›
Connect the mobile phone with the hands-free system.
›
Set the access point in the Mobile phone - Settings - Access point menu (de-
pending on the operator, usually "Internet").
›
Switch on the visibility of the hands-free system for other devices in the Mobile
phone - Bluetooth - Visibility menu.
›
Use the device that is to be connected to search for available Bluetooth
ces.
›
Select the hands-free system (as standard "SKODA_BT") from the list of found
devices.
›
Enter the password on the device being connected and follow any instructions
given on this device or in the information display.
›
Enter the desired Internet address in the Internet browser. The operating sys-
tem requests the entry of the telephone number for the internet access (de-
pending on the operator, usually "*99#").
®
®
devi-
Communication and multimedia
107