Changing A Wheel; Vehicle Tool Kit - Skoda Yeti Owner's Manual

Vehicle tool kit

Fig. 167 Boot: Example for placing the vehicle tool kit
Fig. 168 Vehicle tool kit

First read and observe the introductory information given on page 213.
The vehicle tool kit and the lifting jack, on which a sign is affixed, are stowed in a
box in the boot » Fig. 167; there is also space here for the detachable ball head of
the towing device. The box is secured with a strap. The placement of the vehicle
tool kit can vary depending on the vehicle equipment.
214
Do-it-yourself
The components of the vehicle tool kit (if included in the vehicle)
Torx wrench/flat screwdriver
1
Adapter for anti-theft wheel bolts
2
Towing eye
3
Wire tool for removing the full wheel trims
4
Car jack
5
Wheel wrench
6
Extraction pliers for wheel bolt caps
7
Replacement bulb set
8
Screw the jack arm fully back into its home position after use to allow you to
store it in the box with the vehicle tool kit.
WARNING
The factory-supplied lifting jack is only intended for your model of vehicle.
■
Under no circumstances use it to lift heavier vehicles or other loads – risk of
injury!
Ensure that the vehicle tool kit is safely secured in the boot.
■
Ensure that the box is always secured with the strap.
■

Changing a wheel


Introduction
This chapter contains information on the following subjects:
Preliminary tasks
Changing a wheel
Follow-up tasks
Loosening and tightening wheel bolts
Raising the vehicle
Securing wheels against theft
» Fig. 168.

215
215
216
216
217
217
