If the WPS PIN menu item is selected in the instrument cluster, then a PIN must
be entered in the device to be connected and the instrument cluster.
Operating a Wi-Fi network in the information display
First read and observe the introductory information given on page 108.
When a Wi-Fi network is switched on, the following menu items are displayed
when the WLAN menu item is selected:
Off - Switch off the Wi-Fi network (depending on the context)
■
■
Device List - Display a list of external devices
Active device - Display a list of active devices
■
Block - Block device connections
■
■
Known devices - Display a list of known devices
Rename - Rename the device
■
Block - Block device connections
■
Device blocked - Display a list of blocked devices
■
Unblock - Remove the connection block
■
Delete lists - Delete device lists
■
Known devices - Delete the list of known devices
■
■
Device blocked - Delete the list of blocked devices
Both lists - Delete both device lists
■
Password - Use of password to log on to the Wi-Fi network
■
■
Show - Display a password to log on to the Wi-Fi network
Generate - Generate a new password to log on to the Wi-Fi network
■
Wi-Fi name - Use of Wi-Fi network name
■
■
Show - Display the Wi-Fi network name
Rename - Rename the Wi-Fi network
■
WPS config. - Wi-Fi network connection using WPS
■
■
Pushbutton - Automatic connection
WPS PIN - PIN entry for the connection
■
Data counter - Display information about the volume of data transferred
■
■
Current conn. - Display the volume of data transferred when connected
Total - Display the total volume of data transferred
■
Reset - Reset the information about the volume of data transferred
■
Settings - Wi-Fi network settings
■
Access point - Access point settings
■
Settings - Access point management
■
APN - Change the access point name
■
User name - User Name
■
■
Password - Password
Reset - Reset access point factory settings
■
Prioritisation - Set the connection priority
■
■
Calls - Set the connection priority for calls
Data - Set the connection priority for data transfer
■
Encryption - Set the encryption
■
■
WPA2 - Enable WPA 2 encryption
Open - No encryption
■
Visibility - Set the Wi-Fi network visibility
■
■
Visible - Wi-Fi network is visible to other devices
Invisible - Wi-Fi network is not visible to other devices
■
Data roaming - Set the data roaming
■
■
No roaming - Data roaming is not allowed
Allow - Data roaming is allowed
■
Always ask - Question setting for data roaming
■
■
Wi-Fi channel - Select Wi-Fi network channels (preferably set to channel 11)
Channel 1... Channel 11 - Display the Wi-Fi network channels
■
Reset - Reset Wi-Fi network factory settings
■
Voice control
Introduction
This chapter contains information on the following subjects:
Dialogue
Voice commands - GSM II
Voice commands - GSM III
Communication and multimedia
110
111
111
109