Technical Data; Identification; Engine Number; Engine Characteristics - Skoda Octavia III 2013 Workshop Manual

00 –

Technical data

1

Identification

(SRL000704; Edition 06.2014)
⇒ "1.1 Engine number", page 1
⇒ "1.2 Engine characteristics", page 1
1.1

Engine number

The "engine identification characters" and "serial number" are
shown on the crankcase narrowly above the gearbox connection.
"Engine identification characters" and "serial number" are located
on the sticker -arrow- on the upper toothed belt guard.
The "engine identification" characters are also indicated on the
vehicle data sticker.
Fitting locations for vehicle data stickers:
♦ ⇒ Maintenance ; Booklet Octavia III
♦ ⇒ Maintenance ; Booklet Yeti
The engine number consists of up to nine characters (alphanu‐
meric). The first part (maximum 3 characters) makes up the
"engine code", and the second part (6 characters), the "serial
number". If more than 999 999 engines with the same engine
code were produced then the first digit of the six part section will
be replaced by a letter.
Vehicles with four-digit engine identification characters
♦ Starting with the letter "C", new four digit engine codes have
been introduced.
♦ The first 3 digits of the engine identification characters refer to
the displacement and the mechanical construction of the en‐
gine. They are type-punched on the cylinder block including
the serial number.
♦ The 4th digit refers to the output and torque of the engine and
depends upon the engine - J623- control unit.
1.2

Engine characteristics

Edition 01.2014, version 1.0
Octavia III
Engine identification characters
Manufactured
Emission standards
Displacement
Output
Torque
Bore
Stroke
Compression
Cylinder/valves per cylinder
RON
Ignition system, fuel injection
Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
3
cm
kW at rpm
Nm at rpm
∅ mm
mm
at least
1.6/81 kW MPI engine - Edition 06.2014
CWVA
02.14►
EU5
1598
81/5800
155/3800
76.5
86.9
10.5
4 / 4
unleaded 95
Bosch ME 17
1)
1
1. Identification