Skoda Yeti Owner's Manual page 154

Fitting the tow bar
Fig. 128 Removing the cap on the rear bumper/inserting the tow bar
Fig. 129 Locking the lock and removing the the key/replacing the lock cap

First read and observe the introductory information and safety warn-
ings on page 150.
›
Grip the cap on the rear bumper
direction of the arrow 1 and remove in the direction of the arrow 2.
›
Remove the cover for the mounting recess
wards direction.
›
Put the tow bar in the ready position
›
Grip the tow bar from underneath
until you hear it click into place »
The handwheel » Fig. 128 returns automatically and rests on the tow bar
C
152
Driving
» Fig. 128 at the handle , release in the
B A
» Fig. 125 on page 150 in a down-
3
» page 151.
» Fig. 128 and insert into the mounting recess
.
›
Lock the handwheel lock by turning the key
tion of the arrow 3 to the stop, and remove the key in the direction of the arrow
4.
›
Put the cap onto the handwheel lock in the direction of the arrow
E
›
Check that the tow bar is securely attached
WARNING
When attaching the tow bar, do not hold the handwheel by hand - risk of
■
injuring fingers!
When removing the cover for the mounting recess, watch out for your hand
■
coming into contact with the opening of the bumper - risk of injuring hand!
After fitting the tow bar, always secure the lock and remove the key.
■
The tow bar must not be operated with the key inserted.
■
If the tow bar is not in the ready position, it cannot be fitted in the mounting
■
recess.
CAUTION
When removing the cover on the rear bumper, please note that there is a risk of
■
paint damage to the bumper or cover.
After removing the key, always replace the cover on the handwheel lock – risk
■
of lock getting dirty.
Note
Store the cover for the rear bumper and the cover for the mounting recess in a
suitable location in the boot after removal.
» .
» Fig. 129 to the left in the direc-
D
5» .
» page 153.
