Skoda Yeti Owner's Manual page 89

All controls apart from the blower switch
intermediate position.
The blower should always be on to prevent the windows from misting up.
Setting the heating

First read and observe the introductory information given on page 86.
Recommended basic settings of the heating controls for the respective operating modes:
Set-up
Defrosting the windshield and side
windows
Free windshield and side windows
from mist
The fastest heating
Comfortable heating
Fresh air mode - ventilation
Note
Controls , , and the button
■ A B C
Air outlet vents 4 » Fig. 88 on page 85.
■
We recommend that you leave the air outlet vents 3
■
opened position.
» Fig. 90 can be set to any desired
B
Setting of the control dial
A
To the right up to the
stop
Desired temperature 2 or 3
To the right up to the
stop
Desired temperature 2 or 3
To the left up to the
Desired position
stop
» Fig. 90 on page 86.
1
» Fig. 88 on page 85 in the
Note
If the air distribution is positioned towards the windows, the total amount of air is
used to defrost the windows and thus no air will be fed to the footwell. This can
lead to restriction of the heating comfort.
B C

3
  

3
  

Recirculated air mode

First read and observe the introductory information given on page 86.
Recirculated air mode prevents polluted air outside the vehicle from getting into

the vehicle, for example when driving through a tunnel or when standing in a
traffic jam.
Switching on
›
Press the » Fig. 90

The warning light in the button lights up.
Button Air outlet vents 4
1
Open and align with the side win-
Do not switch on
Open and align with the side win-
Do not switch on
Briefly switch on
Do not switch on
Do not switch on
on page 86 button.
Heating and air-conditioning

dow
dow
Opening
Opening
Opening

87