Auto Check Control - Skoda Yeti Owner's Manual

Switch on/off the function for left and right exterior
Mirror adjust.
mirror setting simultaneously.
Factory setting Restore the Convenience factory setting.
a) This function is only available on vehicles with a rain sensor.
b)
This function is only available on vehicles with an electrically adjustable driver seat.
Lights and visibility
The following functions can be activated, deactivated or adjusted here:
Switch on/off and adjust the light duration of the Com-
Coming Home
ing Home function.
Switch on/off and adjust the light duration of the Com-
Leaving Home
ing Home function.
Daytime running
Switch on/off the "DAY LIGHT" function.
lights
Switch on/off the function for automatic rear window
Rear wiper
wiping.
Lane ch. flash Switch on/off the convenience flashing function.
Travel mode Switch on/off the travel model function.
Factory setting Restore the factory setting for the lighting.
Time
The time, time format (12 or 24 hour indicator) and the changeover between sum-
mer/winter time can be set here.
Winter tyres
Here, you can set the speed at which an audible signal should sound. This func-
tion is, for example, used for winter tyres where the maximum permissible speed
is lower than the maximum speed of the vehicle.
When exceeding the speed, the following is shown on the information display:
Winter tyres: max. speed ... km/h.
Units of measurement
The units for the temperature, consumption and distance driven can be set here.
Assistants
The tones of the audible signals for the parking aid can be adjusted here.
Alt. speed dis.
The display of the second speed in mph or in km/h can be switched on here.
Service
Here you can have the remaining kilometres and days until the next service inter-
val displayed, and reset the Service Interval Display.
Factory setting
The information display is returned to its factory settings by selecting the Factory
setting menu.
Door, boot lid and bonnet warning

First read and observe the introductory information and safety warn-
ings on page 15.
If at least one door is open, or the boot or bonnet is open, the information display
indicates the relevant open door or boot/bonnet.
An audible signal also sounds if the vehicle is travelling at more than 6 km/h.

Auto check control


First read and observe the introductory information and safety warn-
ings on page 15.
Vehicle condition
Certain functions and conditions of individual vehicle systems are checked contin-
uously when the ignition is switched on and also while driving.
Some error messages and other information are displayed in the information dis-
play. The messages are displayed simultaneously with the symbols in the infor-
mation display or with the warning lights in the instrument cluster
The Vehicle status menu item is displayed in the menu if there is at least one er-
ror message. After selecting this menu the first of the error messages is dis-
played. Several error messages are shown on the display under the message e.g.
1/3. This indicates that the first of a total of three error messages is being dis-
played.
Warning symbols

Engine oil pressure too low
Clutches of the automatic gearbox DSG are

too hot
» page 18.
» page 21
» page 18
Instruments and Indicator Lights



17