Universal Telephone Preinstallation Gsm Iil - Skoda Yeti Owner's Manual

Media player - Playback via Bluetooth
■
Active device - Connected device
■
Paired devices - List of paired devices
■
Search - Device search
■
Phone name - option to change the name of the phone (default SKODA_BT)
■
Settings
The following menu items can be selected from the Settings menu item.
■ Phone book - Phone book
Update - Update the phone book
■ 1)
List - Arrange the entries in the phone book
■
■ Surname - Arrange according to surname
First name - Arrange according to first name
■
Ring tone - Ring tone setting
■
Back
Return in the Start menu of the telephone.

Universal telephone preinstallation GSM IIl


Introduction
This chapter contains information on the following subjects:
Connecting the phone to the hands-free system
Operate the telephone via the information display
®
Internet connection via Bluetooth
The universal telephone preinstallation GSM II ("hands-free system") includes a
convenience mode for the mobile phone via voice control, the multifunction
steering wheel, the radio or navigation system.
The universal telephone preparation GSM III includes the following functions:
›
Phone Phonebook » page 100.
›
Convenience operation via the multifunction steering wheel
›
Operation of the telephone via the information display
›
Voice control of the telephone » page
›
Music playback from the telephone or other multimedia units
1)
On vehicles fitted with the Amundsen+ navigation system, this function can be accessed via the navi-
gation system menu; refer to the operating instructions for the Amundsen+ navigation system.
104
Using the system
®
» page 99.
» page 105.
109.
» page 112.
›
Internet connection » page
›
Display of SMS messages
All communication between a telephone and the hands-free system of your vehi-
cle can only be established with the help of the following profiles of Bluetooth
technology.
rSAP - Remote SIM access profile
After connecting the telephone with the hands-free system via the rSAP profile,
the telephone deregisters from the GSM network, and communication with the
network is only enabled by the control unit via the vehicle's external aerial. In the
telephone only the interface for Bluetooth
only use the mobile phone to disconnect from the hands-free system, deactivate
®
the Bluetooth connection or dial the emergency number 112 (only valid in some
countries).
HFP - Hands Free Profile
After connecting the telephone with the hands-free system via the HFP profile,

the telephone continues to use its GMS module and the internal antenna to com-
municate with the GSM network.
Note
The following guidelines must be observed
way radio systems.
104
Connecting the phone to the hands-free system
105
107

First read and observe the introductory information given on page 104.
To connect a mobile phone with the hands-free system, it is necessary to inter-
connect the telephone and hands-free system. Detailed information on this is
provided in the operating instructions for your mobile phone. The following steps
must be carried out for the connection.
Connecting the telephone with the hands-free system via the rSAP profile
›
®
Activate Bluetooth and the visibility of your mobile phone on your telephone.
For certain mobile phones it is necessary to switch on first the rSAP function.
›
Switch on the ignition.
107.
» page 106.
®
remains active. In this case, you can
» page 98, Mobile phones and two-
®

