Skoda Yeti Owner's Manual page 62

WARNING (Continued)
If the front passenger seat backrest is folded, passengers may only be con-
■
veyed on the outer seat behind the driver.
Never transport objects on the seat backrest which was folded forwards,
■
which:
impair driver visibility;
■
make it impossible for the driver to control the vehicle, e.g. if they are
■
placed under the pedals, or could protrude into the driver's zone;
could lead to injury to passengers due to a change of direction or braking
■
manouvre when accelerating sharply.
Electric front seat adjustment
Fig. 45 Controls for the electric seat adjustment

First read and observe the introductory information and safety warn-
ings on page 58.
Adjusting a seat in a forward/back direction
›
Press the switch » Fig. 45 forwards or backwards in the direction of arrow 1.
B
Set the height of the seat cushion
›
Press the switch » Fig. 45 upwards or downwards.
B
Adjust the angle of the seat cushion
›
Press the switch » Fig. 45 in the direction of the arrow 2 or 3.
B
Adjusting the angle of the seat backrest
›
Press the switch » Fig. 45 in the direction of the desired setting.
C
60
Using the system
Reducing or increasing the curvature of the lumbar support
›
Press the switch » Fig. 45
A
Raising or lowering the curvature of the lumbar support
›
Press the switch » Fig. 45
A
The adjusted driver's seat position can be set in the memory of the
seat » page 60 or the remote control key
Note
If the movement of the seat is inadvertently interrupted during an adjustment,

once again press the switch in the appropriate direction and complete the adjust-
ment of the seat.
Memory function for the electrically adjusted seat

First read and observe the introductory information and safety warn-
ings on page 58.
The memory function for the driver's seat provides the option to store the posi-
tions of the driver's seat and the external mirrors. Each of the three memory but-
tons » Fig. 46 can be assigned a set position.
B
Storing seat and exterior mirror settings for driving forward
›
Switch on the ignition.
›
Adjust the seat to the desired position.
›
Adjust both of the exterior mirrors
›
Press the button » Fig.
SET A
›
Within 10 seconds after pressing the
button .
B
An acknowledgment sound confirms the storage in the seat memory.
forwards or backwards.
upwards or downwards.
» page 61.
Fig. 46
Memory buttons and SET button
» page 56.
46.
button, press the desired memory
SET

